TEKRAM Combo-805 |
|
|
Host Interfaces: 1394b, USB2.0,eSATA 5 Serial ATA 3.0Gbps channels, with hot swap tray Provide plug-and play O/S-Independent and Host Transparent RAID solution. Hot Swap, Hot Spare and Auto Rebuilding Function Supports. • NVRAM transaction log, and S.M.A.R.T. for drives to improve the RAID system integrity, reliability, and availability.
|
| 原价:¥
现价:¥15000
|
|
|
|
| 产品介绍 |
 |
| Tekram combo-805 combines high speed FireWire800/1394b, USB 2.0, and eSATA host connections with SATA drive interface, to offer blistering performance, easy to manage redundancy and secure SATA RAID subsystem. The SATA RAID subsystem offers easy scalability from RAID levels 0, 1 (0+1), 3, and 5 to just simple JBOD, RAID configuration and monitoring can be done through the local LCD front control panel or serial port, and offers true plug’n’play to any Windows or Macintosh environment with no software and drivers required, making it very easy to use with minimal technical maintenance. |
| 售后服务 |
 |
| 保修条款: 1.商品质量问题认定标准:对于客户反映的商品质量问题和故障现象,我们将严格按照标准方法进行测试,由于非产品本身故障原因造成的硬件兼容性、软硬件兼容性问题,不能认定为商品的质量问题。 2.保修规定细则: ① 第一年免费保修,第二、三年按照厂商规定执行。 ② 售出7日内发生故障,可原价退款或更换同等商品;售出一月内发生故障,可更换新品;售出第二个月至一年内发生硬件故障免费保修;第二、三年发生硬件故障保修,若因厂商更换零部件而产生的费用由客户自行承担。在保内的商品必须无物理损伤、无自行修理痕迹,否则将不予保修。 |
| 详细参数 |
 |
System Architecture • Intel 80219 I/O processor • 128MB on-board DDR200 SDRAM with ECC protection • Marvell 8 channels SATA II controller • NVRAM for RAID configuration & transaction log • Write-through or write-back cache support • Firmware in Flash ROM for easy upgrades
Host Interface • IEEE 1394b x 2: 800Mbps • USB 2.0 x 1: 480 Mbps • E-SATA x 1: 1.5Gbps
Disk Bus Interface • 5 Serial ATA 3.0Gbps channels, with hot swap tray
Monitors/Indicators • Push buttons and LCD display panel for setup, alarm mute and configuration • 5 drive LED indicators and 3 environment LED indicators • Environment and drive failure indication through LCD, LED and alarm buzzer • Built-in alarm
Electrical • Input Voltage: +5VDC, +12VDC • Power Source Loading (w/o disk drive) @ 12V (0.5A max.) @ 5V (1.44A max.)
Mechanical • Form Factor: 3 consecutive 5.25” driver bays • Dimension: 148 x 128 x 220 mm • Weight: 5.95 lbs/2.7 kg (w/o disk drive)
RAID Features • RAID level 0, 1 (0+1), 3, 5 and JBOD • Multiple RAID selection • Dynamic Volume Expansion • Online capacity expansion and RAID level migration simultaneously • Automatically and transparently rebuilds hot spare drives • Hot swap new drives without taking the system down • Instant availability and background initialization • Automatic drive insertion / removal detection and rebuilding |
|
|